Spectra-logic TAC/COM SERIES Manuel d'utilisateur télécharger pdf (Page 106)

Tac/Com Control Head Manual SM06 Rev. 4.10

f) Using the normal editing procedure (SELECT/NEXT), select a valid option for

each feature presented. The configuration mode may not be left until all options

are completed.

g) It is up to you to ensure that the selected options are compatible with each other

and with the hardware being used. If they are not, the control head may not

operate correctly. Read the following table carefully to ensure that you

understand the configuration options completely.

3.12.2 Configuration Option Table

FEATURE VALID OPTIONS COMMENTS S/W VER.*

# OF RADIOS 2,3,4 This is the maximum number of radios the

control head can handle, not the number

installed.

2.00

DIGITAL GRD

DPL CODES

ON,OFF

Controls the Digital Channel Guard option for all

NT-series radios installed. (Digital Channel Guard

is also known as Digital Private Line or DPL)

2.00

MASTER C/H ON,OFF Determines whether this control head will act as

a master in a master/slave setup. Normally OFF.

2.00

# OF SLAVES

0,1,2

Set to the # of slaves that are connected to this

master control head. This feature supersedes

the MASTER C/H feature.

2.26

STATUS DISPLAY

ON POWER-UP

ON,OFF Determines whether or not the radio status lines

are displayed on power-up.

2.20

HELP DISPLAY ON

POWER-UP

ON,OFF Determines whether or not the help information

option is displayed on power-up.

2.47

DATA PAD PORT

0,A,B,C

Set to the serial port that the master control

head's Data Entry Pad is connected to. Set to 0 if

you do not have a Data Entry Pad. Port A is on

the main system connector. Ports B and C are

on the optional auxiliary serial I/O board

connector.

2.26

RADIO

RT-9600, RT-7200,

RT-30, RT-138, RT-450,

450-SYS, RT-406, 406-

SYS, NT30A,

NT30B, NT136, NT150,

NT403, NT450, NT450A,

NT450B, NT450C, NT806,

FF-40,

SYN I, SYN XTR,

2x5,2x5 EXT,PAR BCD,

805-1,

Selects the radio type for each slot.

Make sure that the radio type selected matches

the interface board installed in that slot.

The 450-SYS and 406-SYS options simulate the

C-1000 control head

(with an RT-450 or RT-406F as the UHF RT).

2.00

SPEC L, SPEC L1,

SPEC L2, ASTRO,

NTX138, NTX066,

NTX403

SPEC = SPECTRA, L indicates a standard radio,

L1 indicates control set up with a ‘Zone’ switch,

L2 is Reserved (S/W Ver. 2.44)

Page 3-32 Jan 4, 2006

ENG-FORM: 806-0106.DOT

CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.

1 2 ... 101 102 103 104 105 106 107

Commentaires sur ces manuels

Pas de commentaire

Spectra-logic TAC/COM SERIES Manuel d'utilisateur Page 106

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Spectra-logic TAC/COM SERIES